The PS4 is an excellent console with many impressive features, but Sony’s older generation device does suffer from some hardware and software issues. One of the most common issues is beeping and ejecting disks randomly. Thankfully, there are multiple ways to troubleshoot these problems.
To fix your PS4, first restart the console, update the software, and reduce storage (if full). Clean the game disk if it’s dirty. You can also cover the eject button sensor to resolve the issue, but it voids the warranty. Troubleshoot to determine the cause of the error before doing anything else.
Many users have claimed that covering the eject button sensor solved their issue. However, doing so is not for the faint of heart – it’s pretty easy but it voids the warranty making it impossible to return your device. But if you’re console’s already out of warranty maybe that’s not a big deal!
Why Is My PS4 Beeping?
A beeping PlayStation 4 isn’t something to take lightly. It may seem like a slight annoyance, but beeping can be a warning sign for other issues. So, why exactly is your PS4 beeping?
Your PS4 can beep for a variety of reasons. Typically, a PS4 will beep when it detects major hardware issues like faulty connections and loose screws. PS4 consoles may also beep to warn you when it’s overheating.
What if the Disk Is Also Ejecting?
A PS4 may beep and eject discs due to problems with the eject button, issues with the eject screw, software malfunctions, and complications with the actual discs. However, you can’t know which of these reasons is causing your PS4 to go haywire without proper troubleshooting.
What Options Do I Have to Fix My PS4?
You have multiple troubleshooting and problem-solving options to address your issues with the PS4. It’s likely you can solve your beeping issue with a little time, care, and determination. Here are some of the most common solutions you have available to fix your PS4:
Restart Your Console
Have you tried turning it on and off again? This may be an obvious question and first instinct, but if you haven’t, restart your console. Many users have reported this solves the problem or mitigates the issue.
- Turn off your PS4 by pressing and holding the power button for 30 seconds until you hear two beeps.
- Unplug the power cables, HDMI cables, and any other cords.
- Wait five minutes, plug the console back in, and reboot.
- If your PS4 has stopped beeping, congratulations! If not, follow the troubleshooting steps below.
Clean the Game Disk
Cleaning the disk itself is never a bad idea. Be sure to use a lint-free cleaning cloth specifically designed for Blu-ray Discs or DVDs. Using other fabrics such as T-shirts, paper towels, or washcloths can be too abrasive and cause further damage.
Check for a Software Update
Installing the latest system software update may or may not resolve your issue. However, this is a necessary part of the troubleshooting process. Here are the steps to update your system software on the PS4:
- Select Settings from the home menu using your PS4 controller.
- Choose System Software Update.
- Select the option Update Now.
- Follow the prompts provided, choose Next, and wait for the download to complete. You’ll see the license agreement when the download is finished.
- Accept the software update.
- The software update should begin to install. Your PS4 may restart during the update.
Check Your Outlets and HDMI Ports
Checking your outlets and HDMI ports is another way to troubleshoot the beeping issue. Make sure your wall outlets are working properly by trying to plug in other devices. Check all of your PS4 cables and ports for any damage or issues.
You can even use an air duster to clean out any dust or debris at this point.
Cover the Eject Button
Many users have solved the PS4 beeping problem by fixing the eject button sensor. The eject button can cause issues if the screws are loose, resulting in ejected disks and beeping sounds. However, this solution will void your warranty.
You’re better off using a different solution if you don’t want to void your warranty.
- Turn off your PS4 and remove all cables.
- Remove the seals and screws from the front fuselage shell with the Sony logo. From there, remove the faceplate revealing the panel underneath.
- Clean the dust from these panels using a can of Falcon Dust Compressed Air (on Amazon) or something similar. Be sure to angle the air duster properly to avoid any damage.
- Afterward, you’ll need to remove the outer shell of the PS4 to access the sensor. To do this, flip the console around. You should notice three screws. Remove these screws.
- You should now have your PS4 cover removed, exposing the fan, hard drive, and a bit of the motherboard.
- Spray the cover and exposed components with the air duster. Be careful to avoid damaging any parts.
- You’ll notice a bit of exposed green motherboard near the fan of your PS4. You’ll see a shiny metal rectangle on the exposed motherboard. This is the PS4 eject sensor.
- You can use either electrical tape or scotch tape over this sensor. This prevents the sensor from activating, meaning your PS4 should stop ejecting disks randomly.
- From there, put the PS4 cover back on as normal, along with the three screws.
- Finally, plug in your PS4 and all cables. Turn the console back on to see if the issue is resolved.
Disconnect Any Accessories
Different third-party devices and accessories can cause issues with your PS4. Be sure to disconnect any devices or accessories. Accessories and devices can include headphones, adapters, microphones, etc.
If you have multiple accessories, unplug them one at a time to determine if a specific device is causing the beeping issue.
How Can I Prevent My PS4 From Beeping?
There are a few other options available to you besides the troubleshooting solutions listed above. Regular maintenance, updates, and general care can keep your PlayStation 4 operating in top condition. Here’s how you can prevent your PS4 from beeping.
Regularly Dust and Clean Your Console
Regularly cleaning and dusting your console is one of the solutions available to you. By using a can of compressed air, you can clean out any ports or crannies. You can even remove the faceplate and outer shell to access harder-to-reach areas.
Beware of Overheating
Overheating can cause your PS4 to beep or suffer other damages. You can avoid overheating by ensuring your console is dust and debris free. You should also give your console time to cool down when it’s not in use.
Placing your console in an area where it has proper airflow is also wise. You may also want to unplug any extra devices to avoid using more power.
Invest in a Bigger HDD
You can add a bigger hard drive disk to your PS4 to expand its storage capacity and potentially prevent it from beeping. The PS4 can handle a USB 3.0 hard drive up to 8TB in size. Keep in mind that you’ll need to configure this HDD in the settings menu to use it properly.
Should I Disassemble My PS4?
There are a few things to keep in mind If you’re considering disassembling your PS4. Disassembling your console is an excellent way to access hard-to-reach areas for cleaning or DIY purposes. However, taking apart your PS4 is sure to void the warranty.
The PS4 warranty is good for about one year. If your console is older than one year, it won’t matter whether you take it apart or not. If you’re still in the one-year range, you may be better off contacting the manufacturer for professional repairs.
Furthermore, it’s possible to damage your console if you decide to take it apart. If you aren’t particularly tech-savvy or don’t trust yourself to be gentle enough, you may be better off seeking professional services.
Can I Return a Beeping PS4?
If your PlayStation 4 is still beeping, you may be wondering if you can return your console . If your device is still under warranty and you haven’t voided it in any way, the answer is probably yes. However, you won’t be able to return your PS4 if your device’s warranty has expired or you voided it somehow.
So if your PS4 is under warranty, it may be best to return the console instead of messing around with it . If your warranty has expired, feel free to take it apart and use the sensor fix to solve the issue.